Are you in need of reattaching the existing masonry veneer to your commercial building’s main structure?
This process avoids the costly and disruptive need to remove and replace the entire facade, helping to keep the building’s appearance and historical look intact.
Step 1: Drill a pilot hole using a percussion hammer drill through the mortar joint.
Step 2: Insert the Stitch-Tie into the dry set installation tool mounted on the rotary hammer S.D.S. drill.
Step 3: Drive the Stitch-Tie until the nose of the dry set installation tool is hard against the veneer.
Step 4: The dry set installation tool automatically recesses the Stitch-Tie into the face of the masonry to patch the hole.
Unmatched Durability
At Chamberlin Roofing & Waterproofing, we don’t cut corners. When it comes to sealing, shielding, and standing the test of time, durability matters to us. A solution we can use is called Helical Stitch Ties. These re-anchor the veneer to the structure of your building.
If you want to learn more about this high-strength solution we can provide for your building, contact us today. We are available and equipped to help!